Partition Walls
Ergonomics, Comfort
Functionality, Aesthetics
Flexible solutions for dividing up space in style
Ergonomics, comfort, functionality, aesthetics. These are the key words when organizing office spaces.
The engagement and sense of well-being that a well-designed space provides are all important elements in ensuring the best environment for those who work there.
Reschini presents a complete range for the design and organization of all essential spaces within an office: from workstations to archives, reception areas, relaxation corners, and representative meeting rooms. Each space plays a fundamental role, and all must follow the same design choices in order to reinforce a strong corporate identity.
Beyond walls: the art of dividing spaces
Modula walls
System
The MODULA system for partition walls features a load-bearing aluminium structure with steel connections. The standard components of this simple system ensure quick installation and the possibility of disassembly and reassembly over time.
The load-bearing structure consists of a single 50 x 34 mm profile, which can be used both as a upright and as a crosspiece, allowing optimized space usage both vertically and horizontally. These profiles are connected to each other using steel clamps.
The installation of infill panels is achieved using simple hook accessories which, when attached to panels and/or transparent elements, allow interchangeable modulest o be hung on the structure with four-point locks. This ensures that the crosspieces do not have to bear static loads
Different types of buffers are available:
Special aluminium profiles allow the integration of openable elements (doors and windows) on which panelling up to 40 mm thick, simple or insulating glazing, with possible fixed or openable fanlights, can be installed.
The lateral wall connections and ceiling connections are fitted with telescope profiles and corresponding compensation and thrust accessories in order to be able to recover any differences in size and out-of-level of ceilings, walls and floors.
The joint line between the various infill elements is ensured by uniform open gaps of 7 or 18 mm, which can be concealed with gaskets or with “omega” profiles featuring plastic covers that hide the fastenings. The walls are equipped, for all infill solutions, with two-way linear connections, two-way corner connections, as well as three- and four-way connections.
The installation of infill panels is achieved using simple hook accessories which, when attached to panels and/or transparent elements, allow interchangeable modulest o be hung on the structure with four-point locks. This ensures that the crosspieces do not have to bear static loads
Different types of buffers are available:
- blind panelling, 18 mm thick, on both sides of the wall
- single central glass
- two single panes of glass, one on each side of the wall
- central double glazing
- two semi-structural single panes, one on each side of the wall
- two structural single panes, one on each side of the wall
Special aluminium profiles allow the integration of openable elements (doors and windows) on which panelling up to 40 mm thick, simple or insulating glazing, with possible fixed or openable fanlights, can be installed.
The lateral wall connections and ceiling connections are fitted with telescope profiles and corresponding compensation and thrust accessories in order to be able to recover any differences in size and out-of-level of ceilings, walls and floors.
The joint line between the various infill elements is ensured by uniform open gaps of 7 or 18 mm, which can be concealed with gaskets or with “omega” profiles featuring plastic covers that hide the fastenings. The walls are equipped, for all infill solutions, with two-way linear connections, two-way corner connections, as well as three- and four-way connections.
Synthesis
- Total finished wall thickness: mm 92-96
- Supporting structure made from a single 50×34 mm profile for uprights and transoms
- Mounting of the infills on the vertical uprights by means of a special “hook” accessory applied to the panels at four points
- Solutions with central single, double coplanar glass 4-6 mm, with central double glazing max. 22 mm, or with 6 mm “semi-structural” application
- Simple insertion of opening elements for doors and windows
- Special lower plinth profile for installations that makes it possible to run cables and to affix space-saving recessed switches to door posts
Modula walls
System
The MODULA system for partition walls features a load-bearing aluminium structure with steel connections. The standard components of this simple system ensure quick installation and the possibility of disassembly and reassembly over time.
The load-bearing structure consists of a single 50 x 34 mm profile, which can be used both as a upright and as a crosspiece, allowing optimized space usage both vertically and horizontally. These profiles are connected to each other using steel clamps.
The installation of infill panels is achieved using simple hook accessories which, when attached to panels and/or transparent elements, allow interchangeable modulest o be hung on the structure with four-point locks. This ensures that the crosspieces do not have to bear static loads
Different types of buffers are available:
Special aluminium profiles allow the integration of openable elements (doors and windows) on which panelling up to 40 mm thick, simple or insulating glazing, with possible fixed or openable fanlights, can be installed.
The lateral wall connections and ceiling connections are fitted with telescope profiles and corresponding compensation and thrust accessories in order to be able to recover any differences in size and out-of-level of ceilings, walls and floors.
The joint line between the various infill elements is ensured by uniform open gaps of 7 or 18 mm, which can be concealed with gaskets or with “omega” profiles featuring plastic covers that hide the fastenings. The walls are equipped, for all infill solutions, with two-way linear connections, two-way corner connections, as well as three- and four-way connections.
The installation of infill panels is achieved using simple hook accessories which, when attached to panels and/or transparent elements, allow interchangeable modulest o be hung on the structure with four-point locks. This ensures that the crosspieces do not have to bear static loads
Different types of buffers are available:
- blind panelling, 18 mm thick, on both sides of the wall
- single central glass
- two single panes of glass, one on each side of the wall
- central double glazing
- two semi-structural single panes, one on each side of the wall
- two structural single panes, one on each side of the wall
Special aluminium profiles allow the integration of openable elements (doors and windows) on which panelling up to 40 mm thick, simple or insulating glazing, with possible fixed or openable fanlights, can be installed.
The lateral wall connections and ceiling connections are fitted with telescope profiles and corresponding compensation and thrust accessories in order to be able to recover any differences in size and out-of-level of ceilings, walls and floors.
The joint line between the various infill elements is ensured by uniform open gaps of 7 or 18 mm, which can be concealed with gaskets or with “omega” profiles featuring plastic covers that hide the fastenings. The walls are equipped, for all infill solutions, with two-way linear connections, two-way corner connections, as well as three- and four-way connections.
Synthesis
- Total finished wall thickness: mm 92-96
- Supporting structure made from a single 50×34 mm profile for uprights and transoms
- Mounting of the infills on the vertical uprights by means of a special “hook” accessory applied to the panels at four points
- Solutions with central single, double coplanar glass 4-6 mm, with central double glazing max. 22 mm, or with 6 mm “semi-structural” application
- Simple insertion of opening elements for doors and windows
- Special lower plinth profile for installations that makes it possible to run cables and to affix space-saving recessed switches to door posts
Sky walls
System
The SKY system for walls represents a different approach to interior space division. This single-glass wall combines transparency, brightness, and refined detailing, making it a unique system with exceptionally high aesthetic and technological quality.
Sky walls
System
The SKY system for walls represents a different approach to interior space division. This single-glass wall combines transparency, brightness, and refined detailing, making it a unique system with exceptionally high aesthetic and technological quality.
In a constantly changing world, we strive to be pioneers of innovation and excellence.
